Download PDF files (multi-language)

English_xTool SafetyPro™ IF2_Quick Start Guide	Deutsch_xTool SafetyPro™ IF2_Kurzanleitung	Español_xTool SafetyPro™ IF2_Guía de inicio rápido
Français_xTool SafetyPro™ IF2_Guide de démarrage rapide	Italiano_xTool SafetyPro™ IF2_Guida rapida	Nederlands_xTool SafetyPro™ IF2_Korte handleiding
Português_xTool SafetyPro™ IF2_Manual de referência rápida	日本語_xTool SafetyPro™ IF2_クイックガイド	한국어_xTool SafetyPro™ IF2_빠른 시작 가이드
繁體中文_xTool SafetyPro™ IF2_快速入門指南	简体中文_xTool SafetyPro™ IF2_快速使用指南

List of items

	Inline fan and controller
	Protective cover
	Ribbed plastic anchors
	Screws
	Bluetooth dongle
	Wall-mounting fixture
	Smoke exhaust pipe
	Pipe connector 1
	Pipe connector 2
	Pipe clamp
	Hex key
	Quick start guide
	Safety instructions

Note: 
1. The power cable varies according to the region in which the product is delivered. 
2. Pipe connector 1 is applicable to xTool S1 and F1 Ultra. 
3. Pipe connector 2 is applicable to xTool M1 Ultra, M1, F1, P2, P2S, D1, and D1 Pro.

Meet xTool SafetyPro™ IF2

Connect xTool SafetyPro™ IF2

1. Install the protective cover

2. Install the smoke exhaust pipe of the xTool SafetyPro™ IF2

3. Connect the smoke exhaust pipe of xTool machines

1) Applicable to xTool S1 and F1 Ultra

 

 

2) Applicable to xTool M1 Ultra and F1

 

3) Applicable to xTool M1, P2, P2S, D1, and D1 Pro

 

 

 

 

4. Connect to a power supply

5. Set up wireless connection

Note:
A wireless connection can be established only with xTool S1, M1 Ultra, P2S, and F1 Ultra.

■ Connect the Bluetooth dongle to the extension port of the xTool machine. The preceding figure is for reference only.

■ After the Bluetooth dongle is connected, the connection between the inline fan and the xTool machine is automatically established. The machine device settings on XCS display information about the inline fan. For more details, see "Use with XCS."

■ To pair again, press the power button of the inline fan for at least 5s. The wireless connection indicator blinks white.

 

(Optional) Wall mounting

To fix the device in a place, you can fasten it to a wall-mounting fixture before installing the smoke exhaust pipes.

 

The following tools are required but not included in the pack.

 

 

Use xTool SafetyPro™ IF2

Use with XCS

Download XCS

Use xTool SafetyPro™ AP2 on XCS

Indicator description

Maintenance

Clean the fan

In the case of abnormal fan speed or poor smoke exhaust due to dust build-ups, you need to clean the fan blade.

1) Remove the fan

 

 

 

2) Clean the fan

 

3) Install the fan back