After you insert the Bluetooth dongle of xTool SafetyPro™ IF2 into the extension port of the xTool laser machine, you can view the inline fan information on XCS and manually set the airflow level.

Note:

• One xTool laser machine supports only one Bluetooth dongle.
• You cannot connect two Bluetooth accessories of the same type simultaneously. For example, you cannot connect two xTool SafetyPro™ IF2s at the same time.

Prerequisites

• You have downloaded XCS on your computer and the version is V2.2.21 and above.
• You have connected the xTool machine to your computer properly.
• You have upgraded the firmware of your laser machine (XCS > Device settings > Basic info > Check for updates).

View information about the inline fan

Step 1. Open XCS and create a project.

Step 2. On the right panel, select the inline fan you have connected. 

The Accessory Information page is displayed, showing details about the inline fan.

Operate the inline fan

Auto mode

• Regular mode: The inline fan adjusts its speed based on the processing mode and material you select, providing optimal smoke exhaust.
• Quiet mode: The inline fan exhausts smoke at a reduced volume, lowering the noise level.

Manual mode

In Manual mode, you can set the airflow level as required.

Connect another Bluetooth accessory

1. Press and hold the power button of the inline fan for 5 seconds to enter the "Waiting for connection" mode. The wireless connection indicator will blink white. 
2. On the Accessory Information page, click Add Bluetooth accessories. Ensure that the target accessory is close to the machine during the connection process.

Delete the inline fan

Click Ignore on the Accessory Information page. After being ignored, the inline fan will be deleted from the Accessory Information page.