1. Download and install XCS on your iPad

Search for "xTool Creative Space" in App Store or Google Play or visit xtool.com/software to download the app and install it on your iPad.

2. Connect xTool M1 Ultra to XCS on your iPad

(1) In the top-right corner of XCS, tap + Add project > Create project.

(2) On the top of the project editing page, tap Please connect a device.

💡 Note: If you have connected an xTool device in XCS before, tap the device's name on the top of XCS, and select Connect device.

(3) Tap WiFi > Configure Wi-Fi.

(4) Ensure that xTool M1 Ultra is turned on. Click M1 Ultra > Next.

Press and hold the right sliver button on the device for a few seconds until the indicator turns white. Tap OK, next.

(5) Enter the Wi-Fi name and password, and click OK, next.

Click Go to connect device hotspot, then the page jumps to the Wi-Fi list, and select xTool_M1 Ultra.

(6) Go back to XCS. Tap Connection completed. The configuration is completed, and tap Go to connect.

(7) You can see your device name on the list. Tap it to connect it.

3. Download and install XCS on your computer

(1) Download the xTool Creative Space software applicable to the operating system that runs on your PC from https://www.xtool.com/pages/software.

(2) Double-click the software you've downloaded to install it.

4. Connect xTool M1 Ultra to XCS on the computer

(1) Use the USB cable to connect xTool M1 Ultra to your computer. 

(2) Open XCS on your computer. On the top-right corner of XCS, click the + New project button.

(3) On the top of the project editing page, click Please connect a device. 

(4) On the pop-up window, click the name of your device to connect to it.

5. Obtain the QR code on the computer

Click the obtain background icon on the top right toolbar, and you can get a QR code.

6. Place a material and shoot the background

(1) Place a material on the baseplate.

(2) In the bottom of the canvas, select the icon > Snapshot preview in the editor bar.

(3) Use the camera to take a picture of the processing area. You can tap the link on your iPad and watch the tutorial first.

Make sure four viewpoints are included in the picture.

(4) When you complete to shoot the background, click Sent to computer.

(5) Use the scanning window to scan the QR code on the computer.

(6) The background is sent to the computer successfully.

7. Continue processing…

Go to Process on Flat Surface in XCS to continue processing on your computer.