Search for "xTool Creative Space" in App Store or Google Play or visit xtool.com/software to download the app and install it on your mobile phone.
(1) Open XCS. On the home screen, tap Connect device > WiFi. Tap Configure Wi-Fi.
(2) Ensure that xTool M1 Ultra is turned on. Click M1 Ultra > Next. Press and hold the right sliver button on the device for a few seconds until the indicator turns white.
Select the checkbox, and click OK, next.
(3) Enter the Wi-Fi name and password, click OK, next.
Click Set Wi-Fi, then the page jumps to the Wi-Fi list, select xTool_M1 Ultra. Go back to XCS.
(4) Put your mobile phone as close as possible to the device. You can see Configuration completed in the window. Tap Go to connect to the next step.
(5) You can see your device name on the list. Tap it to connect to it.
(1) Download the xTool Creative Space software applicable to the operating system that runs on your PC from https://www.xtool.com/pages/software.
(2) Double-click the software you've downloaded to install it.
Note: Click Yes if you are asked "Do you want to allow this app to make changes to your device?" and then continue the installation as prompted.
(1) Use the USB cable to connect xTool M1 Ultra to your computer.
(2) Open XCS on your computer. On the top-right corner of XCS, click the + New project button.
(3) On the top of the project editing page, click Please connect a device.
(4) On the pop-up window, click the name of your device to connect to it.
Click Obtain background on the right panel, and you can get a QR code.
On the bottom of the home screen, tap the + icon > + New project.
(1) Place a material on the baseplate.
(2) In the bottom-left corner of the project editing page, select Snapshot preview.
(3) Use the camera to take a picture of the processing area. You can tap the link on the phone and watch the tutorial first.
Make sure the left and right sides of the device align with the edges of the phone screen, and four viewpoints must be included in the picture.
(4) When you complete shooting the background, click Sent to computer.
(5) Use the scanning window to scan the QR code on the computer.
(6) The background is sent to the computer successfully.
Go to Process on Flat Surface in XCS to continue processing on your computer.