Operate xTool M1 Ultra with XCS on Your Mobile Phone
Updated Aug 1,2024
Updated Aug 1,2024

xTool Creative Space (XCS) is an all-in-one software for graphic designing and editing, laser process setting, and machine controlling.

Download and connect to XCS

Minimum and recommended requirements for mobile phones

Item

Minimum configuration

Recommended configuration

Operating system

Android 10.0 or later

iOS 15 or later

RAM

2 GB

3 GB or more

Storage

32 GB

64 GB or more

With the minimum configurations, all the functions of XCS can be used properly. When you import a complex image, however, XCS may fail to run smoothly.
With the recommended configurations, XCS can run more smoothly when you import and edit a complex image, the software delay may be shorter, and the performance is better.

Download and install XCS

(1) Search for "xTool Creative Space" in App Store or Google Play or visit xtool.com/software to download the app and install it on your mobile phone.

(2) Open XCS. On the top-right corner, tap and select the language you use.

Connect xTool M1 Ultra to XCS

(1) On the home screen, tap Connect device > WiFi. Tap Configure Wi-Fi.

(2) Ensure that xTool M1 Ultra is turned on. Click M1 Ultra > Next. Press and hold the right sliver button on the device for a few seconds until the indicator turns white. 

Select the checkbox, and click OK, next.

(3) Enter the Wi-Fi name and password, click OK, next.

Click Set Wi-Fi, then the page jumps to the Wi-Fi list, select xTool_M1 Ultra. Go back to XCS.

(4) Put your mobile phone as close as possible to the device. You can see Configuration completed in the window. Tap Go to connect to the next step.

(5) You can see your device name on the list. Tap it to connect to it.

 

Set up xTool M1 Ultra in XCS

(1) On the home screen, tap the device name to view the device information.

Device name: Taps   to change the device name.

Processing module: Displays the processing module or accessories that you are using.

Device handbook: Taps to visit the support center of xTool M1 Ultra.

Firmware version: Checks for updates and updates the firmware.

Wi-Fi setting: Connect the device to a Wi-Fi network.

Hotspot password: Set a hotspot password for the device, so that if others want to connect to your device in Hotspot mode, they need to enter a password.

 

(2)  Tap Device settings, and set up the device for work.

  • Flame alarm: If a flame is detected in the working area, xTool M1 Ultra will pause processing and raise the alarm. Low means low detection sensitivity; High means high detection sensitivity. 
  • Stops when moved: If xTool M1 Ultra is moved or tilted during processing, it will pause processing.
  • Exhaust time after processing: The time duration the exhaust fan continues to work after a processing task ended.
  • Fan blocking detection: Toggles it on when you use the smoke exhaust module of xTool M1 Ultra. However, when you use the smoke purifier connector (sold separately), turn off the function.
  • Exhaust fan speed setting: Sets the speed of the exhaust fan.
  • Fill light brightness: Adjusts the brightness of the fill light in the working area.
  • Buzzer: After you disable it, XCS beeps only when exceptions occur.
  • Ink module test: Tests the ink module before processing with inkjet printing because the ink module gets blocked easily.

 

(3) Tap Working info, you can see the device's working information.

  • Working time: Displays the total time the device processing materials
  • Operating times: Displays the total number of times the device has been operated
  • Standby time: Displays the total time the device is on standby

 

(4) Tap Accessory settings, you can set the drawing pen settings and purifier working time.

  • Drawing pen settings: Selects xTool pen or Custom pen as needed. (Cricut pens are supported.)
  • Purifier working time after processing:  The time duration the smoke purifier continues to work after a processing task ends. By working for a longer time, the smoke purifier can exhaust the remaining smoke after processing.

 

(5) In the Calibration tab, you can calibrate the laser module, ink module, and Snapshot preview calibration as needed.

Note: To start the Snapshot preview calibration function, you should follow the tutorial and instruction strictly. Click Start or go to Snapshot preview calibration tutorial for xTool M1 Ultra.

Process a material in XCS

1. Create a new project

On the bottom of the home screen, tap the icon , and tap + New project.

2. Select the processing mode and material name

(1) In the bottom-right corner of the project editing page, tap Setting.

(2) Select a processing mode. Here we take Lasering on flat surface as an example.

(3) Select the name of your material. Click + Material EasySet Library to search among more materials.

If you can't find the name of your material, you can select User-defined material and click Confirm.

3. Place a material and shoot the background

💡 Note: There are 2 ways to shoot the background, one is to preview on the mobile phone, and the other one is to preview on the computer. 

For Snapshot preview on the computer, go to Use Snapshot Preview Function with XCS on the Computer (for Mobile Phone).

Here introduces how to shoot and preview the background on the mobile phone.

(1) Place a material on the baseplate.

(2) In the bottom-left corner of the project editing page, select Snapshot preview.

(3) Use the camera to take a picture of the processing area. You can tap the link on the phone and watch the tutorial first.

Make sure the left and right sides of the device align with the edges of the phone screen, and four viewpoints must be included in the picture.

You can refer to as following:

 

(4) When you complete to shoot the background, click Insert into canvas. You can position processing objects based on the background.

4. Design a processing object

Use the tools on the bottom to design processing objects on the material. 

💡 Note: You can import images, insert shapes, enter text, draw vector graphics, and so on. For more information on how to use XCS to design objects, see Software Learning Center.

5. Edit objects and set parameters

(1) Select objects on the canvas and set parameters for them. Select the processing type.

(2) Click EasySet panel on the bottom, and you can set more parameters for the object.

(3) You can edit the objects further by using the other features in the Design panel.

💡 Note: You need to set parameters for every object. A missed object may fail to be processed.
The parameters that can be set for bitmap objects and vector objects are different. You can select multiple objects of the same type and set parameters for them at once.

(4) If you select the user-defined material, click icon to measure the thickness of material.

6. Preview the processing area

You can preview the processing area on the material by framing. Take the following steps to start framing:

(1) In the top right corner, tap Process. Set the framing parameters first.

(2) Tap Framing in the software and press the button on the device. 

(3)  After you confirm that the processing area is proper, click Framing completed in XCS. 

7. Start processing

(1) On the bottom of the software, click Start. Read the safety instructions on the window and click OK.

(2) Press the button on xTool M1 Ultra to start processing.

 

 

 

Was this page helpful?
0 out of 0 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.