About this guide
This guide provides a comprehensive overview of M1 Ultra's processing modes, delineating their functionalities, specifications, and suitable applications. Each mode is tailored for specific types of work, whether you are engraving intricate designs on a flat surface, performing high-speed blade cuts, or creating detailed prints with inkjet technology.
An overview of each processing mode
# Lasering on flat surface
- Processing area: 300 x 300 mm
- Speed: 1 - 400 mm/s
- File types: Vector, Bitmap
- Power Range: 1 - 100%
- Maximum height for auto-measure: 33 mm
- Maximum material thickness:
- Without Riser Base: 27 mm
- With Riser Base: 125 mm
# Use rotary attachment
- Processing area: 300 x 300 mm
- Speed: 1 - 400 mm/s
- File types: Vector, Bitmap
- Power range: 1 - 100%
- Maximum height for auto-measure: 33 mm
- Maximum diameter (with Riser Base):
- Roller: 99 mm
- Chuck: 108 mm
# Blade cut
š”Kind reminder: The following blade types are available only after selecting the material to be processed in blade cut mode within xTool Creative Space (XCS).
- Cutting blade:
- Processing area: 295 x 295 mm
- Blade pressure: 45 - 500 g
- Speed: 1 - 100 mm/s
- File type: Vector
- Maximum Processing Thickness: 2.5mm
- Rotary blade:
- Processing area: 300 x 300 mm
- Blade pressure: 45 - 2800 g
- Speed: 1 - 100 mm/s
- File type: Vector
- Note: Due to the physical properties of the rotary blade, it is natural to encounter over-cutting.
- Maximum Processing Thickness: 2.5mm
- Fine-point blade:
- Processing area: 300 x 300 mm
- Blade pressure: 35 - 600 g
- Speed: 1 - 400 mm/s
- File type: Vector
- Maximum Cutting Thickness: 1.5mm
# Foil transfer tip
- Processing area: 300 x 300 mm
- Embossing pressure: 45 - 2800 g
- Speed: 1 - 100 mm/s
- File type: Vector
- Tip types: Fine Tip, Medium Tip, Bold Tip
- Maximum Processing Height: 3mm
# Pen drawing
- Processing area: 300 x 300 mm
- Pen pressure: 35 - 600 g (Recommended: 80 g for blue low-tack mat + A4 paper)
- Speed: 1 - 400 mm/s
- File type: Vector
- Maximum Processing Height: 3mm
- Pen color types: Red, Orange, Yellow, Green, Cyan, Blue, Purple, Black, or user-defined marker pens compatible with the pen holder on the basic carriage of M1 Ultra
- Notes:
- Excessive pen pressure may damage pen nibs. Hence, using recommended parameters is advisable. For more, visit xTool Material EasySet Library at https://mt.xtool.com/
- Pens must be fitted into pen holders to secure them to the basic carriage.
- After use, clean the pen nib and cap it to prevent clogging.
- For laser processing, ensure the removal of the drawing pen to avoid damage from the high temperature or open flames as the resultant effect of lasering.
# Inkjet printing
- Processing area: 296 x 286 mm (X-axis: 4 - 300 mm, Y-axis: 13 - 299 mm)
- Ink concentration: 0 - 100%
- File type: Bitmap
- Notes:
- Place the bottom cover of the ink cartridge container in the designated area before processing. The machine will automatically reattach it after processing, unless it is undergoing ink module calibration.
- Ink cartridges are susceptible to clogging when exposed to air. To extend their lifespan, please consult the maintenance video tutorial below.
# Multi-module processing
- Processing area: If inkjet printing is included, follow the inkjet printing processing area.
- File types: Various combinations
- Individual settings: Set parameters individually for each processing mode.
š” Use tips:
1. When "Inkjet printing" mode is selected, do not place materials in the grey areas beyond the XCS canvas.
2. Different modes may require changing modules, such as switching from "Fine-point blade" to "Pen drawing" or from "Process on baseplate" to "Blade cut". You will receive software prompts for these adjustments.
# Screen preparation
- Processing area: 255.8 x 209.6 mm (X-axis: 32~286.8mm, Y-axis: 41.4~250mm)
- Processing types: Line Engraving, Fill Engraving
- Power range: 1 - 100%
- Speed: 1 - 300 mm/s
- Notes:
- M1 Ultra is only compatible with small-sized screens, specifically 9 inches x 12 inches (228.6mm*304.8mm).
- Install the frame fixing piece on the right.
- Mirror the screen printing patterns left to right before processing.
Comparison of processing modes
Processing Mode | File Type | Processing Type | Area (mm) | Max Speed (mm/s) | Max Height for Auto-measure (mm) | Is Baseplate Required | Maximum Cutting Thickness | ||||
Without Riser Base (mm) | With Riser Base (mm) | ||||||||||
Process on Baseplate | Vector, Bitmap | Engrave | Vector Engrave | 300*300 | 300 | 33 | Yes | 25 | 125 | ||
Bitmap Engrave | 400 | Yes | |||||||||
Laser Cutting | 300 | Yes | |||||||||
User Rotary Attachment | Roller | Chuck | No | Roller | Chuck | ||||||
Engrave | Vector Engrave | 25 | 120 | / | 99 | 108 | |||||
Bitmap Engrave | 400 | ||||||||||
Processing Mode | File Type | Processing Area ļ¼mmļ¼ | Blade / Pen Pressure (g) | Max Speed (mm/s) | Types | Is Baseplate Required | Maximum Cutting Thickness | |
Without Riser Base (mm) | With Riser Base (mm) | |||||||
Cutting Blade | Vector | 295*295 | 45~500g | 100 | / | Yes | 2.5 | / |
Rotary Blade | 300*300 | 45~2800g | 100 | / | 2.5 | / | ||
Foil Transfer Tip | 45~2800g | 100 | Fine Tip, Medium Tip, Bold Tip | 3 | / | |||
Fine-point Blade | 35~600g | 400 | / | 1.5 | / | |||
Fine-point Pen | 35~600g | 400 | Red, Orange, Yellow, Green, Cyan, Blue, Purple, Black | 3 | / | |||
Processing Mode | File Type | Processing Type ļ¼mmļ¼ | Power / Concentration | Max Speed (mm/s) | Is Baseplate Required | Maximum Cutting Thickness | |
Without Riser Base (mm) | With Riser Base (mm) | ||||||
Inkjet Printing | Bitmap | 296*286 | Concentration 0~100% | / | Yes | 20 | / |
Screen Preparation | Vector, Bitmap | 255.8*209.6 | Power 0~100% | 300 | / | ||
Help us improve
If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the āNoā button in the āWas this page helpful?ā section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.
Still need help?
If you need any human assistance, please create a ticket by clicking the āSubmit a Ticketā button in the āHelp Ticketā section below. Our service team will get back to you in 1 business day via E-mail.
