Issue description

The laser module hits the rotary attachment's chuck during automatic measurement.

Troubleshooting

#1 Adjust the position of the laser module

• Please move the laser module to ensure that the distance probe can land on the highest point of the cylindrical material during measurement.
• If the distance probe is not aligned with the highest point of the cylindrical material, the laser module may encounter issues during the distance measurement process while descending.

#2 Adjust the placement of the material

• If using a chuck jaw, since the chuck's jaw will protrude above the material when clamping, the laser module may collide with the chuck during distance measurement.
• Please rotate the rotary attachment 180° on a flat surface, and mirror the XCS processing pattern up and down.

Note: If your project allows working with the roller mode, this issue can be avoided.

Help us improve

If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.

Still need help?

If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.