Read and get familiar with all safety precautions and measures before using this product. Strictly follow all safety precautions. Ensure that this product is properly assembled.

Follow the operating principles:
· Check the product for damage every time before you use it. Do not operate it in any way when any damage or defect is found.
· Ensure that the works surface is clean and flat.
· Pay attention to working status of the device during operation.
· Do not disassemble the product or change its structure in any way without authorization. 
· Ensure that the workspace is open and well-ventilated.
· It is recommended that you heat press a material on a stable, flat, and heat-resistant work surface. 
· Once xTool Smart Press is assembled on xTool Smart Press Platform, pay attention to the control arm of the device and the heating plate of xTool Smart Press when you move them. Or you may get injured.
· Pay attention to the order of assembly: first, plug the power cable in xTool Smart Press. Then, install xTool Smart Press on the platform. Once the device is installed on the platform, do not push the device in any way from the back. Pay attention to any potential risk of injury or burns if the device is dropped.