xTool P2 Q&A
Updated Aug 29,2024
Updated Aug 29,2024

Get to know the product

What is the maximum continuous working time of the P2 machine?

  • The maximum continuous working time of the machine is 336 hours. Please note: 
    1. Processing cannot be done when unattended. 
    2. It is not recommended to cut continuously for more than 4 hours. After continuous cutting, the lens needs to be cleaned after a single project is cut.

What is the maximum width of the material that can be processed by the Conveyor used with P2?

  • The technical parameters of P2 state that the maximum working area is 23.6 inch.
    The bed size of P2 is 26.7 inch, but the widest bed that can fit in is 24.5inch. Being able to fit in does not mean that all can be processed.

 

At what temperature of the P2 water tank will an alarm for high temperature or low temperature and stop processing?

  • Warning if the temperature is below 5℃ and above 35℃ Stop if the temperature is below 0℃ and above 40℃

 

Get to know the operations, exceptions and precautions

How to pump out the water in P2 in advance when transporting it over long distances? Is there any guidance document or video?

 

What are the ingredients of P2 antifreeze? Can it be used without antifreeze? What should customers buy locally as a substitute?

  • The antifreeze of P2 is designed with antifreeze + water. Water is used to cool the liquid, and antifreeze is used to prevent water from freezing when the ambient temperature is low.
    The composition of antifreeze is Propanediol. Customers can use PROPYLENE GLYCOL (PGW) or ethylene glycol (EGW) to replace our antifreeze. However, we cannot provide a reference for the ratio of antifreeze to water when customers choose PGW/EGW, and we are not responsible for machine failures caused by incorrect ratios due to customer reasons. It is recommended that customers use our official antifreeze.
    If the customer's area is located in the tropics and will not be lower than 0 degrees all year round, theoretically, antifreeze can be used without adding antifreeze. At this time, pure water can be used directly as antifreeze. However, for safety reasons, it is recommended to add antifreeze.
    Note: In any case, try to add liquid for cooling, even pure water. It is forbidden to start the machine without adding any coolant.
     

P2 works continuously for 6-8 hours a day in a place with a temperature of 45°-50°. Is the existing water tank cooling sufficient? Is additional cooling equipment required?

  • xTool P2 should operate within a temperature range of 5-35°C.
    For optimal performance, it is recommended to operate the P2 in an environment with a temperature range of 10-30°C. This helps protect the device from damage due to high temperatures.
    Implement appropriate ventilation and cooling mechanisms, such as industrial fans or air conditioners, to reduce ambient temperature
Was this page helpful?
5 out of 8 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.