Preparing for Inkjet Processing with xTool M1 Ultra
Updated Jul 15,2024
Updated Jul 15,2024
This article applies to
xTool M1 Ultra with the ink module
About this guide
This guide will show you what to prepare before inkjet printing processing for your xTool M1 Ultra.
How to do it
Remove the tape from the ink cartridge.
Gently press the nozzle plate a few times with a lint-free cloth or tissue to ensure the ink cartridges dispense properly.
For severe clogs, refer to the tutorials for soaking the nozzle plate.
Install the ink cartridge on the ink module and secure the left and right latches to lock it in place.
Ensure the inkjet module is securely mounted on the multi-function holder, the locking clamp is engaged, and the USB cable is correctly connected as shown in Pic 1.
Place the placing board in the lower right of the machine as shown in Pic 2 and apply the cleaning sticker on it.
Prior to inkjet printing, remove the bottom cover of the ink cartridge and place it on the placing board.
Position your material within the processing area.
Preparations are finished. You may begin inkjet printing now.
Help us improve
If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.
Still need help?
If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.
Was this page helpful?
4 out of 5 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
If you want to cooperate with xTool on causes like education, public welfare, innovation, etc., or if you want to review our machines, please email partner@xtool.com