Use the Frame Fixing Piece for xTool M1 Ultra
Updated Sep 14,2024
Updated Sep 14,2024

This page describes how to install the frame fixing piece inside xTool M1 Ultra.

1. Remove the fine-point blade or drawing pen from the basic carriage first. Otherwise, it may scratch the screen. Skip this step if you haven't installed the fine-point blade or drawing pen.

2. Remove the screw on the baseplate.

3. Fit the frame fixing piece inside xTool M1 Ultra with the screw you've removed.

4. Flip the frame and screen over so the back side faces up.

5. Fit the frame and the fixing piece together, with the tabs inserted into the notches.

6. Connect xTool M1 Ultra to xTool Creative Space (XCS) to engrave on the screen.

Note: In screen printing, the frame is placed with the front side facing up. You may need to rotate and reflect the design objects based on how you will place your material.

xTool M1 Ultra supports the Screen preparation processing mode. After placing a screen inside xTool M1 Ultra, you can select the Screen preparation processing mode in XCS and engrave on the screen as prompted.

Was this page helpful?
3 out of 5 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.