Things to Pay Attention to for First-Time Use
Updated Jun 26,2024
Updated Jun 26,2024

Power-on

  • Make sure the emergency stop switch is not pressed.
The switch is triggered (pressed down) vs. reset (a bit popped out)
  • Make sure the field lens protector is removed before processing.
Remove the lens protector before use

USB connection

Make sure the connection cable is inserted into the correct port at the right side of the machine. See the picture below.

Use the top port with the computer sign

 

Laser focus

 

Set wireless connection using XCS mobile app

Note: In the following guides, make sure you connect to the Wi-Fi hotspot created by your F1 Ultra after the “Add device” screen.

 

Wi-Fi connection

 

AP connection

 

Protective enclosure

The enclosure is connected to springs inside the machine and therefore has some give. Sometimes it may not close down entirely, leaving some gaps at the bottom. To make sure it's closed properly, move it all the way down. 

Note: It's recommended to use the handle at the front of the enclosure to move it up and down.

Was this page helpful?
35 out of 36 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.