xTool Creative Space (XCS) is an all-in-one software for graphic designing and editing, laser process setting, and machine controlling.

Download XCS

Minimum and recommended PC requirements

• With the minimum configurations, all the functions of XCS can be used properly. When you import a complex image, such as an image larger than 50,000,000 pixels or an SVG image larger than 1 MB, however, XCS may fail to run smoothly.
• With the recommended configurations, XCS can run more smoothly when you import and edit a complex image, the software delay may be shorter, and the performance is better.

Download and install XCS

(1) Download the xTool Creative Space software applicable to the operating system that runs on your PC from https://www.xtool.com/pages/software.

(2) Double-click the software you've downloaded to install it.

(3) Open XCS. On the top-right corner, click the icon > Settings, and set the display language for XCS.

Connect to XCS via USB cable

(1) Use the USB cable to connect xTool F1 Ultra to your computer.

(2) Open XCS on your computer. On the top-right corner of XCS, click the + New project button.

(3) On the right side of the project editing page, click Connect device. 

Note: If you have connected an xTool device in XCS before, click the icon > Connect device.

For XCS 2.0:
On the top of the project editing page, click the name of the device > select Connect device.

(4) On the pop-up window, click the name of your device to connect to it.

Connect to XCS via Wi-Fi/IP address

1. Connect xTool F1 Ultra to a Wi-Fi network

(1) Follow the instructions in Connect to XCS via USB cable to connect xTool F1 Ultra to XCS by using the USB cable.

(2) In the top-right corner of XCS, click the gear icon next to the image of xTool F1 Ultra.

(3) On the Device settings window, find Wi-Fi setting in Basic info. Click Setting, select a Wi-Fi network and enter its password, and click Next.

(4) Click Complete, and then you can see the IP address of xTool F1 Ultra under Wi-Fi setting. If you change the Wi-Fi setting, the IP address changes accordingly. 

Note: If you want to connect xTool F1 Ultra to XCS via IP address, take down the IP address.

2. Connect xTool F1 Ultra to XCS via Wi-Fi/IP address

(1) Ensure that your computer connects to the same Wi-Fi as xTool F1 Ultra. On the right side of the project editing page, click the icon > Connect device.

For XCS 2.0:
On the top of the project editing page, click the name of the device > select Connect device.

(2) On the pop-up window, select Wi-Fi and click your device name on the list to connect it. Or select IP, and then enter the IP address of your device to connect it.

Note: If you cannot find your device through Wi-Fi, try IP connection instead.