Connect xTool F1 Ultra to XCS on the Computer
Updated Sep 11,2024
Updated Sep 11,2024

xTool Creative Space (XCS) is an all-in-one software for graphic designing and editing, laser process setting, and machine controlling.

Download XCS

Minimum and recommended PC requirements

Item

Minimum configuration

Recommended configuration

Processor

Intel Core i5-6200U

Intel Core i5-11600

Operating system

Win 10 (64 bit)

macOS 10.14 or later

RAM

8 GB

16 GB

Display resolution

1280 × 720 (pixels)

1920 × 1080 (pixels) or higher

Hard drive

8 GB

12 GB

  • With the minimum configurations, all the functions of XCS can be used properly. When you import a complex image, such as an image larger than 50,000,000 pixels or an SVG image larger than 1 MB, however, XCS may fail to run smoothly.
  • With the recommended configurations, XCS can run more smoothly when you import and edit a complex image, the software delay may be shorter, and the performance is better.

 

Download and install XCS

(1) Download the xTool Creative Space software applicable to the operating system that runs on your PC from https://www.xtool.com/pages/software.

 

(2) Double-click the software you've downloaded to install it.

Note: Click Yes if you are asked "Do you want to allow this app to make changes to your device?" and then continue the installation as prompted.

 

(3) Open XCS. On the top-right corner, click the icon > Settings, and set the display language for XCS.

 

Connect to XCS via USB cable

(1) Use the USB cable to connect xTool F1 Ultra to your computer.

(2) Open XCS on your computer. On the top-right corner of XCS, click the + New project button.

 

(3) On the right side of the project editing page, click Connect device

Note: If you have connected an xTool device in XCS before, click the icon > Connect device.

 

(4) On the pop-up window, click the name of your device to connect to it.


Connect to XCS via Wi-Fi/IP address

1. Connect xTool F1 Ultra to a Wi-Fi network

(1) Follow the instructions in Connect to XCS via USB cable to connect xTool F1 Ultra to XCS by using the USB cable.

 

(2) In the top-right corner of XCS, click the gear icon next to the image of xTool F1 Ultra.

(3) On the Device settings window, find Wi-Fi setting in Basic info. Click Setting, select a Wi-Fi network and enter its password, and click Next.

 

(4) Click Complete, and then you can see the IP address of xTool F1 Ultra under Wi-Fi setting. If you change the Wi-Fi setting, the IP address changes accordingly. 


Note: If you want to connect xTool F1 Ultra to XCS via IP address, take down the IP address.

 

2. Connect xTool F1 Ultra to XCS via Wi-Fi/IP address

(1) Ensure that your computer connects to the same Wi-Fi as xTool F1 Ultra. On the right side of the project editing page, click the icon > Connect device.

 

(2) On the pop-up window, select Wi-Fi and click your device name on the list to connect it. Or select IP, and then enter the IP address of your device to connect it.

Note: If you cannot find your device through Wi-Fi, try IP connection instead.


Was this page helpful?
12 out of 14 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.