Note:
xTool Creative Space (XCS) is legacy software and is no longer maintained. We recommend using the latest version of xTool Studio. The XCS screenshots and instructions in this article may differ from those in xTool Studio and are provided for reference only.
xTool Creative Space (XCS) is an all-in-one software for graphic designing and editing, laser process setting, and machine controlling.
Download XCS
Minimum and recommended PC requirements
Item | Minimum configuration | Recommended configuration |
Processor | Intel Core i5-6200U | Intel Core i5-11600 |
Operating system | Win 10 (64 bit) macOS 10.14 or later | |
RAM | 8 GB | 16 GB |
Display resolution | 1280 × 720 (pixels) | 1920 × 1080 (pixels) or higher |
Hard drive | 8 GB | 12 GB |
- With the minimum configurations, all the functions of XCS can be used properly. When you import a complex image, such as an image larger than 50,000,000 pixels or an SVG image larger than 1 MB, however, XCS may fail to run smoothly.
- With the recommended configurations, XCS can run more smoothly when you import and edit a complex image, the software delay may be shorter, and the performance is better.
Download and install XCS
(1) Download the xTool Creative Space software applicable to the operating system that runs on your PC from https://www.xtool.com/pages/software.
(2) Double-click the software you've downloaded to install it.
.png)
(3) Open XCS. On the top-right corner, click the
icon > Settings, and set the display language for XCS.
Connect to XCS via USB cable
(1) Use the USB cable to connect xTool F1 Ultra to your computer.
(2) Open XCS on your computer. On the top-right corner of XCS, click the + New project button.
(3) On the right side of the project editing page, click Connect device.
icon > Connect device.
(4) On the pop-up window, click the name of your device to connect to it.
Connect to XCS via Wi-Fi/IP address
1. Connect xTool F1 Ultra to a Wi-Fi network
(1) Follow the instructions in Connect to XCS via USB cable to connect xTool F1 Ultra to XCS by using the USB cable.
(2) In the top-right corner of XCS, click the gear icon next to the image of xTool F1 Ultra.
(3) On the Device settings window, find Wi-Fi setting in Basic info. Click Setting, select a Wi-Fi network and enter its password, and click Next.
(4) Click Complete, and then you can see the IP address of xTool F1 Ultra under Wi-Fi setting. If you change the Wi-Fi setting, the IP address changes accordingly.
2. Connect xTool F1 Ultra to XCS via Wi-Fi/IP address
(1) Ensure that your computer connects to the same Wi-Fi as xTool F1 Ultra. On the right side of the project editing page, click theicon > Connect device.
(2) On the pop-up window, select Wi-Fi and click your device name on the list to connect it.Or select IP, and then enter the IP address of your device to connect it.
