Note
1. The video below demonstrates the measurement and adjustment of the timing belt on one side of the Y-axis as an example, and the same procedure can be carried out for the belt on the other side of the Y-axis.
2. Try to adjust the tension of the timing belts on both plates to be the same to ensure better engraving and cutting results.
3. If the tension gauge used in the video is not included in your purchase, please contact customer support at support@xtool.com for assistance with purchasing.
Screw positions on timing belts
For the Y-axis
For D1 series machines, the fixing and adjustment screw positions for the Y-axis timing belts are identical to those shown in the picture below.
(1).png)
For the X-axis
The positions of the fixing screws and adjustment screws on the X-axis timing belts may vary depending on the machine.
D1 Pro 2.0
 |  |
D1 & D1 Pro
 |  |
Tension measurement and belt adjustment
Help us improve
If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.
Still need help?
If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.
Services & Help
Learn & Community
Contact Us
Copyright © 2025 xTool All Rights Reserved.