How to Calibrate Blade Cut Pressure for M1
Updated Jan 9,2024
Updated Jan 9,2024

Why do I need it

Blade cut pressure calibration is to improve M1's cutting effect by compensating for slight flatness errors resulting from various factors. The calibration, however, cannot resolve significant flatness errors due to causes including baseplate deformation, loose laser module, and loose X-axis gantry. In such cases, please contact xTool Customer Service at support@xtool.com for further assistance.

 

Tools needed

  1. Blue cutting mat *1
  2. Computer with XCS software
  3. Several sheets of A4-sized (210mm x 297mm) blank paper

 

Application scenario

This article applies to troubleshooting the issues below.

  1. The cutting depth is not even under the blade cut processing type.
  2. To replace the laser module, blade housing, blade, or baseplate.

 

How to do it

  1. Connect M1 to your computer via USB and run XCS.
  2. Screw the baseplate in place.
  3. Make sure the baseplate is clean; otherwise, clean it thoroughly.
  4. Place one sheet of A4 blank paper at the center of the cutting mat and place the cutting mat on the baseplate.
  5. Click step-by-step the setting icon -- "Setting" -- "Calibrate". Refer to the picture below.
  6. Click "Next".
  7. Press the machine's physical start button for processing and wait for it to complete.
  8. Compare the cutting result with the software pop-up diagram (in the next step) and find the starting point on the paper where the cutting marks disappear. This is your calibration value. For this guide, it's position C6.
  9. Select the corresponding calibration value and click "OK".
     
  10. Now you have completed the blade cut pressure calibration.

 

Help Us Improve

If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.

 

Still Need Help?

If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.

Was this page helpful?
4 out of 4 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2023 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2023 xTool All Rights Reserved.