xTool Screen Printer Engraving Parameters for Reference
Updated Oct 9,2024
Updated Oct 9,2024
For D Series & S1
- Recommended parameters for high efficiency
Mesh Type | Mesh Count | 100 Mesh | ||||
NEWARTS Screen | Module | Tension（N） | Power (%) | Speed (mm/s) | Linear density (tex) | Pass |
S1-10W | 10~20N | 90 | 149 | 200 | 1 | |
S1-20W | 10~20N | 55 | 162 | 200 | 1 | |
S1-40W | 10~20N | 40 | 253 | 200 | 1 | |
Mesh Type | Mesh Count | 100 Mesh | ||||
NEWARTS Screen | Module | Tension（N） | Power (%) | Speed (mm/s) | Linear density (tex) | Pass |
D1Pro-5W | 10~20N | 95 | 76 | 220 | 1 | |
D1Pro-10W | 10~20N | 80 | 146 | 220 | 1 | |
D1Pro-20W | 10~20N | 70 | 165 | 220 | 1 | |
D1Pro-40W | 10~20N | 35 | 193 | 220 | 1 | |
- Recommended parameters for high accuracy
Mesh Type | Mesh Count | 100 Mesh | |||||
NEWARTS Screen | Module | Tension（N） | Power (%) | Speed (mm/s) | Linear density (tex) | Note | |
S1-2W | 10~20N | 100 | 10 | 300 | Not recommended | ||
S1-10W | 10~20N | 59 | 93 | 300 | |||
S1-20W | 10~20N | 52 | 160 | 300 | ✔ | ||
S1-40W | 10~20N | 52 | 342 | 300 | With the air assist set adjusted to level 1 of airflow | ||
Mesh Type | Mesh Count | 100 Mesh | |||||
NEWARTS Screen | Module | Tension（N） | Power (%) | Speed (mm/s) | Linear density (tex) | Pass | Note |
D1Pro-2W | 10~20N | 100 | 10 | 300 | 1 | Not recommended | |
D1Pro-5W | 10~20N | 80 | 88 | 300 | 2 | ||
D1Pro-10W | 10~20N | 48 | 59 | 300 | 1 | ||
D1Pro-20W | 10~20N | 40 | 82 | 300 | 1 | ||
D1Pro-40W | 10~20N | 20 | 104 | 300 | 1 | ||
For other models
- For additional recommended engraving parameters for various xTool models with Screen Printer, please refer to our xTool Material EasySet Library: xTool Material Settings Library
- Visit the xTool Material Settings Library.
- Select your machine model.
- On the top right corner, scroll down the "Material Type" list to locate and select "Screen Printing".
Preview
Was this page helpful?
13 out of 28 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Tags
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Call Us
Telephone Pre-sales : +1(970)638-7030
After-sales : +1(775)587-7760
Email Pre-sales : vicky@info.xtool.com
After-sales : support@info.xtool.com
Service Time Mon-Fri : 7:00 am - 5:30 pm (PT)
Sat-Sun : 8:30 am - 5:30 pm (PT)
Join xTool Squad
Copyright © 2024 xTool All Rights Reserved.