xTool Store
Line Shift in Cylindrical Processing
Updated Dec 9,2023
Updated Dec 9,2023
Issue Description
If you use the rotary attachment, and the engraved image looks cut or shifted, please refer to this article for troubleshooting.
#1 Check the Image Format
Processing vector images may involve many back-and-forth cylindrical movements, causing the object to slide if the friction is not strong enough.
Here are some ways to make the processing more stable.
- Put rubber bands on both ends of the material.
- Transfer the vector image into a bitmap image.
- Try with a chuck instead of the roller.
#2 Check the Roller Set Screw
Check if the set screw of the roller is not tightened enough.
#3 Check the Jaw Chuck
Check if all the screws on the chuck are fastened properly. Check if the drive belt is loose.
Preview
Was this page helpful?
1 out of 1 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket Tags
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket 
Services & Help
Learn & Community
Copyright © 2025 xTool All Rights Reserved.