Article·5 min
The Processing Modes of M1 and the Relevant Specifications
The Specifications of the Processing Modes:
- No Honeycomb Panel needed:
Laser Flat | Processing Material Size | Maximum Processing Thickness | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
385*300mm | 16mm | Yes | Score Engrave Cut | Vector Bitmap |
| Blade Cut /Print&Blade Cut | Processing Material Size | Maximum Processing Thickness | Knife Pressure | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
365*300mm | 1.5mm | 45~360g | Yes | Blade Cut | Vector |
- Optional for Honeycomb Panel:
| Open Plane | Processing Material Size | Focusing Range (Initial Position of the Baseplate Is 0) | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
385*270mm | -19~16mm | No | Score Engrave Cut | Vector Bitmap |
Laser Cylindrical | Processing Material Size | Focusing Range (Initial Position of the Baseplate Is 0) | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
270*385mm | -19~16mm | No | Score Engrave | Vector Bitmap |
Maximum Processing Speed:
Processing Modes | Maximum Speed |
Score | 160mm/s |
Engrave | 250mm/s |
Cut | 160mm/s |
Blade Cut | 80mm/s |
Preview
Was this lesson helpful?
Lesson 1 / 3
Next Lesson
Use the Print & Blade Cut Function of xTool M1
5 min
