Troubleshooting: Hardware
-
Help Tech Support Troubleshoot Faster
- 【Machine Issue - General】
- The Machine Stops Mid-Job
- The Machine Won’t Power On
- The Machine Won't Frame
- The Machine Keeps Restarting
- The Machine Keeps Processing the Same File
- The Machine Makes Noises During the Processing
- The X-Axis Gantry Isn’t Leveled
- 【Machine Issue - Processing】
- The Engraved Image has Extra Lines
- The Engraved Image isn't Closed Up
- The Engraved Image is Doubled
- The Engraved Image is Doubled after Homing
- The Engraved Image is Wavy
- The Engraved Image is Unclear
- The Engraved Image is Distorted
- The Engraved Image is Mirrored
- 【Machine Issue - Position Limit】
- The Position Limit False Alarm
- The Position Limit Won't Work
- 【Machine Issue - Laser Module】
- The Laser Module Won't Fire
- The Laser Module Won't Move
- The Laser Module Jitters During Processing
- The Laser Module (Infrared) Doesn’t Work as Expected
- The Laser Module Creates Multiple Laser Spots
- The Laser Power Drops Unexpectedly
- The Laser Won't Cut Through the Materials
- 【Machine Issue - Laser Module Fan】