xTool D1

Warranty

xTool Warranty for D1

Guide: Beginner

User Manual for xTool D1 xTool D1 Unboxing and First-time Use [Video] Safety Guide for xTool D1 Laser Cutting & Engraving Understand the Machine Status by the Indicator xTool D1 Engraving & Cutting Parameters for Reference How to Achieve a Better Engraving Effect with Texts?

Guide: Software

xTool Creative Space (XCS) Software Operate xTool D1 with XCS User Manual for xTool D1 LightBurn Software Configure LightBurn Software for xTool D1 LightBurn Software for Experienced Laser Users Precautions when using xTool D1 LightBurn

See all 7 articles

Guide: Hardware

The Engraved Image is Doubled after Homing Set the Laser Positioning Mode Set the Laser Positioning Offset D1 20W Laser Module User Guide [Video] Assembly Video of Extension Kit for xTool D1 & D1 Pro

Guide: Connection

Connect the Device Through Wi-Fi Connect the Device Through an IP Address

Guide: Project

Laser Engrave on Cans with D1 & LightBurn [Video] Laser Engrave on Stainless Steel with xTool D1 & XCS [Video] Laser Engrave on Stone with xTool D1 & XCS [Video] Laser Engrave on Glass with D1 & LightBurn Laser Cut Blue/Transparent Acrylic

Troubleshooting: Hardware

Help Tech Support Troubleshoot Faster 【Machine Issue - General】 The Machine Won’t Power On The Machine Won't Frame The Machine Makes Noises During the Processing The X-Axis Gantry Isn’t Leveled

See all 21 articles

Troubleshooting: Connection

XCS Can’t Find Device Through Wi-Fi XCS Can't Find Device Through USB XCS Finds Device Through USB But Won't Connect XCS Finds Device Through USB But Shows as Unknown XCS Won't Recognize the Laser Module

Maintenance

The Maintenance Guide for D1 Replace xTool D1 Components Replace the Bearings on the Z-axis Plate [Video] Replace the Y-Axis Belt Replace the X-Axis Belt Replace the X-Axis and Y-Axis Motors

See all 15 articles