Connect D1 Pro via Wi-Fi & via IP

Article author
support
  • Updated

#1 Connect D1 Pro via Wi-Fi

Step 1: Establish a USB connection first.

To connect the device via Wi-Fi, we need to establish a USB connection first.
Connect your device to your computer via the original USB cable. If the device is to be connected via USB for the first time, click Connect device.
download__34_.png
If a USB connection has been established earlier, it will then automatically connect.
download__22_.png

Step 2: Set Wi-Fi.

2.1 Click on the gear icon in the upper right corner.
download__23_.png
2.2 Click Setting.
download__24_.png
2.3 Select your Wi-Fi and enter the password. (Make sure it's the same Wi-Fi your computer and D1 Pro are connected to.)
download__25_.png
Note: To make sure your Wi-Fi password contains only English letters but special characters or symbols.
2.4 Wi-Fi configuration complete.
download__26_.png

Step 3: Switch to a Wi-Fi connection.

3.1 Click on the gear icon in the upper right corner.
download__27_.png
 
3.2 Click on Switch device.
download__28_.png
3.3 Click on Wi-Fi and select your device from the list.
download__29_.png
3.4 USB connection switched to Wi-Fi connection.
download__30_.png
 

#2 Connect D1 Pro via IP

To connect the device via IP, we need to establish a Wi-Fi connection first.

Step 1: Following the steps above, click the gear icon and find & copy the IP address of the device. Then click Switch device.

download__31_.png
Note: Please confirm the IP address every time you connect via IP since it renews.

Step 2: Select IP, enter the IP address of the device, and click Connect.

download__32_.png

Step 3: Connected.

download__33_.png

 
 
 

Was this article helpful?

5 out of 5 found this helpful

Have more questions?