Connect D1/D1 Pro via Wi-Fi & via IP
#1 Connect D1/D1 Pro via Wi-Fi
Step 1: Establish a USB connection first.
To connect the device via Wi-Fi, we need to establish a USB connection first.
Connect your device to your computer via the original USB cable. If the device is to be connected via USB for the first time, click Connect device.
If a USB connection has been established earlier, it will then automatically connect.
Step 2: Set Wi-Fi.
2.1 Click on the gear icon in the upper right corner.
2.2 Click Setting.
2.3 Select your Wi-Fi and enter the password. (Make sure it's the same Wi-Fi your computer and D1 Pro are connected to.)
Note: To make sure your Wi-Fi password contains only English letters but special characters or symbols.
2.4 Wi-Fi configuration complete.
Step 3: Switch to a Wi-Fi connection.
3.1 Click on the gear icon in the upper right corner.
3.2 Click on Switch device.
3.3 Click on Wi-Fi and select your device from the list.
3.4 USB connection switched to Wi-Fi connection.
#2 Connect D1/D1 Pro via IP
To connect the device via IP, we need to establish a Wi-Fi connection first.
Step 1: Following the steps above, click the gear icon and find & copy the IP address of the device. Then click Switch device.
Note: Please confirm the IP address every time you connect via IP since it renews.
Step 2: Select IP, enter the IP address of the device, and click Connect.
Step 3: Connected.
Do the XTOOL M1 can be connected by wifi or only connected by USB?
Please sign in to leave a comment.