D1 Pro Quick Start Guide

    Article author
    Support
    • Updated

    Contents:

     

    Unbox and check

    xTool_D1_Pro___________4.jpgxTool_D1_Pro___________5.jpg

    Assemble xTool D1 Pro

    xTool_D1_Pro___________7.jpgxTool_D1_Pro___________8.jpgxTool_D1_Pro___________9.jpgxTool_D1_Pro___________10.jpgxTool_D1_Pro___________11.jpgxTool_D1_Pro___________12.jpgxTool_D1_Pro___________13.jpgxTool_D1_Pro___________14.jpgxTool_D1_Pro___________15.jpgxTool_D1_Pro___________16.jpgxTool_D1_Pro___________17.jpgxTool_D1_Pro___________18.jpgxTool_D1_Pro___________19.jpgxTool_D1_Pro___________20.jpgxTool_D1_Pro___________21.jpgxTool_D1_Pro___________22.jpgxTool_D1_Pro___________23.jpgxTool_D1_Pro___________24.jpgxTool_D1_Pro___________25.jpgxTool_D1_Pro___________26.jpgxTool_D1_Pro___________27.jpg

    Meet your xTool D1 ProxTool_D1_Pro___________29.jpg

     

    Set up xTool D1 Pro

    xTool_D1_Pro___________30.jpgxTool_D1_Pro___________31.jpgxTool_D1_Pro___________32.jpgxTool_D1_Pro___________33.jpg

    Download and install softwarexTool_D1_Pro___________34.jpg

     

    Create with example projectsxTool_D1_Pro___________35.jpgxTool_D1_Pro___________36.jpg

    Use Rotary Attachment xTool_D1_Pro___________37.jpgxTool_D1_Pro___________38.jpgxTool_D1_Pro___________39.jpgxTool_D1_Pro___________40.jpgxTool_D1_Pro___________41.jpg

    Clean the laser modulexTool_D1_Pro___________42.jpgxTool_D1_Pro___________43.jpgxTool_D1_Pro___________44.jpg

    Was this article helpful?

    0 out of 0 found this helpful

    Have more questions?

    Comments

    0 comments

    Article is closed for comments.