FAQ on Rotary Attachment 2
Contents
1. The image is mirrored after engraving, why?
2. The rollers fail to grasp the material in cylindrical processing, why?
3. How to engrave materials in larger diameters (>100mm) through the jaw chuck components?
4. Hard to install the tail module, why?
5. Is the rotary attachment compatible with a third-party laser machine?
6. How to connect the rotary attachment for xTool M1 to a third-party machine?
7. Can I control the rotary attachment through Lightburn or LaserGRBL?
8. The material slides from grasp on rollers or on the jaw components, why?
9. Distorted engraving with Lightburn, what should I do?
1. The image is mirrored after engraving, why?
2. The rollers fail to grasp the material in cylindrical processing, why?

3. How to engrave materials in larger diameters (>100mm) through the jaw chuck components?
4. Hard to install the tail module, why?
1. The screw to fix the tail module is tightened before installing the tail module.
2. The T sliding blocks of the tail module are not placed in the slots of the baseplate.
5. Is the rotary attachment compatible with a third-party laser machine?
6. How to connect the rotary attachment for xTool M1 to a third-party machine?
The rotary attachment 2 kit for M1 or rotary attachment 2 Pro kit for xTool M1 only includes one aviation cable. To connect the rotary attachment with a third-party laser machine, contact us at support@xtool.com to purchase the adapter cable for a third-party laser machine.
7. Can I control the rotary attachment through Lightburn or LaserGRBL?
You can control the rotary attachment 2 through Lightburn or LaserGRBL as long as you can control your laser machine through it.
8. The material slides from grasp on rollers or on the jaw components, why?

9. Distorted engraving with Lightburn, what should I do?
10. There are two types of connecting cables for the second-generation rotary accessories. What is the difference between the xTool D1 version and the xTool M1 version in appearance?
For xTool D1 & other open machines, Please use the flat connector wire (below).
Was this article helpful?
3 out of 5 found this helpful
Have more questions?

Comments
Please sign in to leave a comment.