Valuable Information for Troubleshooting You could Provide Us with
The information below could help a lot with troubleshooting if you may kindly provide us with when email at Support@xtool.com. Thank you!
- Software version
- Firmware version
- Product Serial Number (S/N)
- Computer System Information
- Project file(s)
- Problem video(s)
1. Software version
2. Firmware version
3. Product Serial Number (S/N)
You may find the Serial Number on a label attached to the Rear Plate of the machine.
4. Computer System Information
Right-click on Start, then click on Run and Enter "dxdiag" command for System Information.
Click Go>Utilities>System Information
5. Project file(s)
6. Problem video(s)
The video(s) should cover the whole operation process and the fault phenomenon.
If the failure is not easily reproducible or it occurs at random, please describe in detail the operation performed before the failure and the failure itself.
The software version of my laser is v1.2.14. I will also end the AutoCad file that I use when ai get an error with the scale
Thanks for the comment. A ticket has been created regarding this inquiry.
If you have any questions, we will do our best to support you. Our support team will get back to you via email.
Article is closed for comments.