xTool D1 Laserbox Basic Software-For Laser Newcomer

Article author
support
 

Attention:

The new version of the software(V1.2.0) may have problems when used with the old firmware,The latest firmware version is V40.30.002.01 B1.

If you have upgraded the latest version of the software, please upgrade to the latest version of the firmware at the same time.

 

Laserbox Basic (v1.2.0)

If you are new to lasers, we recommend using Laserbox Basic.

Minimum requirements

Operating system: Windows 7 (64 bit) or macOS Mojave 10.13
Processor: Core i3 or AMD A6 2.4 GHz
Memory: 4 GB RAM
Storage: 5 GB available
 

ChangeLog

2022-1-21 V1.2.0

1. Supporting offset setting for the red cross mode.
2. Providing the laser spot positioning mode.
3. Resolving the problem of firmware update failure.

 

2021-11-19 V1.1.1

1. Add firmware upgrade prompt pop-up window, optimize the text, and guide users to upgrade to the new firmware version.
2. Add help document button on firmware upgrade failure page to help users to solve firmware upgrade problems by themselves.

 

2021-11-15 v1.1.0

1. wifi name and password with network support exists in Chinese and special symbols 
(single and double quotes in wifi name are not supported, spaces and & in password are not supported)
2. Distinguish firmware upgrade/software update & display firmware version number & remove auto-prompt update pop-ups
3. Click the start button to expand the connection list
4. Change the unit of remaining time for processing to minutes
5. Display device information
6. Fixed some problems
 

FAQ

User Manual for Laserbox Basic

APP for D1

Android

  • For Android mobile devices, please search the google store for Laserbox  to download

iOS

  • For Apple mobile devices, please search for Laserbox for xTool in APP STORE to download

For more instructions, please refer to follwoing user manual

Laserbox App User Guide

 
 
 

Was this article helpful?

7 out of 15 found this helpful

Have more questions? Submit a request

Comments

4 comments

  • Comment author
    Charles Stevenson

    Were is the firmware update?

    4
  • Comment author
    Dominic Raico

    Found it, when you open laserbox basic go to the top left of screen to menu->check for firware with your machine plugged in.

    0
  • Comment author
    Jeffrey Aragon

    when I click on check firmware, it says that I am up to date but it is the

    v1.1.0. I cant download the new firmware

     

    0
  • Comment author
    Dan Nguyen

    The app seems to change the dimensions of the object by .5mm when sending to laser. Also it seems to be changing cut and engrave settings. Please make the unit work with lightburn soon.

    0

Please sign in to leave a comment.