Default processing Parameter table for xTool

Article author
support
  • Updated

Attention:

The same material from the different suppliers will vary, So the following parameters are for user's reference only and need to fine-tune the parameter on themselves

Processing type Product Name xTool D1-5W
Material Name Power(%) Speed(mm/s) Of passes
Cutting 3.5mm Corrugated Paper 100% 1
3mm Basswood 100% 1
4mm Basswood 100% 1
5mm Basswood 100% 1
3mm Dark Acrylic 100% 3
0.7mm Artificial Leather 100% 12  1
0.75mm Denim 100% 1
Processing type Product Name xTool D1-10W
Material Name Power(%) Speed(mm/s) Of passes
Cutting 3.5mm Corrugated Paper 100% 9 1
3mm Basswood 100% 5 1
4mm Basswood 100% 3 1
5mm Basswood 100% 2 1
3mm Dark Acrylic 100% 3 3
0.7mm Artificial Leather 95% 20 1
0.75mm Denim 100% 11 1
Processing type Product Name xTool D1-5W
Image type Vector image
Material Name Power(%) Speed(mm/s) Of passes
Engraving Basswood 70% 38  1
3mm Dark Acrylic 100% 18  1
Artificial Leather 35% 30  1
Denim 85% 80  1
Stainless Steel 100% 1
Aluminum Alloy 100% 1
Coated Metal 100% 36  1
Processing type Product Name xTool D1-5W
Image type SD Bitmap
Material Name Power(%) Speed(mm/s) Of passes
Engraving Basswood 95% 70  1
Acrylic 100% 26  1
Artificial Leather 85% 100  1
Denim 100% 135  1
Stainless Steel 100% 1
Aluminum Alloy 100% 1
Coated Metal 100% 60  1
Attention: The processing density is 100
Processing type Product Name xTool D1-10W
Image type Vetor image
Material Name Power(%) Speed(mm/s) Of passes
Engraving Basswood 50% 35  1
Acrylic 100% 25  1
Artificial Leather 35% 30  1
Denim 80% 80  1
Stainless Steel 100% 1
Aluminum Alloy 100% 1
Coated Metal 50% 30  1
Processing type Product Name xTool D1-10W
Image type SD Bitmap
Material Name Power(%) Speed(mm/s) Of passes
Engraving Basswood 75% 100  1
Acrylic 100% 30  1
Artificial Leather 50% 100  1
Denim 100% 100  1
Stainless Steel 100% 12  1
Aluminum Alloy 100% 1
Coated Metal 100% 70  130 
Attention: The processing density is 100

 

 

 

Was this article helpful?

1 out of 1 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.