How To Set the Parameters According to The Materials

Article author
support
  • Updated
  Background Light colored woods such as birch, cherry or maple can be vaporized well by the laser and are therefore more suitable for engraving.
  Attention The same material from differenc supplier will vary,So following parameters are for user's reference only and need to fine-tune the parameter on themselves
Plannar parameters
Ring code SN Material name Cutting Engraving
Speed Power Speed Power
- 0mm Paper 100% 5% 100% 5%
- 7.1mm iPhone6s 0% 0% 90% 20%
0 3mm Basswood 20% 90% 80% 50%
1 5mm  Basswood 7% 95% 80% 50%
2 3mm Black Walnut 12% 90% 80% 50%
3 5mm Black Walnut 12% 94% 80% 50%
6 3mm Pine 13% 90% 80% 50%
7 5mm Pine 13% 93% 80% 50%
10 3mm Cherry 14% 90% 80% 50%
11 5mm Cherry 11% 95% 80% 50%
12 3mm Mahogany 15% 90% 80% 50%
13 5mm Mahogany 6% 96% 80% 50%
14 3mm Willow 12% 92% 80% 50%
15 5mm Willow 5% 95% 80% 50%
16 3mm Acrylic 7% 96% 80% 50%
17 5mm Acrylic 4% 96% 80% 50%
27 2mm Cardboard 40% 80% 100% 10%
28 3.5mm Cardboard 27% 85% 100% 10%
60 2.5mm Acrylic 4% 90% 80% 35%
61 3mm Dense board 15% 90% 80% 30%
62 2.5mm Basswood 20% 90% 80% 30%
63 1.8mm Basswood 20% 90% 80% 30%
Cylindrical engraving
- Glass bottles - - 100% 20%
- Mineral water bottle - - 20% 80%
- Acrylic - - 50% 80%
- Paper towel tube - - 30% 80%
- Easy Pull Can - - 100% 30%
- Wood cylinder - - 50% 80%
- Tsingtian Stone - - 100% 20%
- Ceramic Mug - - 100% 20%

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.