The Lens Mount of the Air Assist Set Is Not the Ideal Angle

Article author
Cecilia Fang
  • Updated

Issue Description

The lens mount can not be tightened to the ideal angle as shown in the photo below.


The screw thread is faulty.
Note: If the lens mount is placed within the error range of plus or minus 30°, it will not affect the use of the machine.


  1. Tight the screw with the air nozzle, so less effort helps get a greater angle.
  2. Use a spare seal, put it under the other side of the lens, and install the mount.
  3. Wrap a loop of plumbing tape around the screw thread, and then install the mount.

Was this article helpful?

0 out of 2 found this helpful

Have more questions?



Article is closed for comments.