1.What materials can laser treasure box cut/engrave?
Laserbox can cut/engrave: cardboard, corrugated cardboard, wood board, acrylic board, fabric, leather, mat board, two-color board, PET, rubber, wood veneer, fiberglass, plastic, Corian, and dozens of other materials. Basically non-metallic materials can be cut and engraved. If you need to cut/engrave other materials, you can send us for cutting/engraving test.
2.Can the Laserbox only cut/engrave official materials?
The Laserbox can cut/engrave non-official materials, but the cutting/engraving parameters of official materials are tested by us repeatedly, so there is no need to set focal length, speed, power and other parameters manually, which can guarantee good cutting/engraving effect and excellent operation experience. In addition, the function of what you draw is what you get is limited to the official material.
3.How thick of material can Laserbox cut thtough?
It can cut through 15mm tung woodboards.
4.Can Laserbox cut/engrave metal?
No. Laserbox cannot cut metal, this is determined by the type of laser. All CO2 glass laser tube based lasers cannot cut metal, Laserbox can engrave metal, such as engraving iPhone cases (the cases are anodized aluminum).
5.What kinds of materials are not suitable for cutting/engraving?
Chromium (VI) containing leather and artificial leather, such as leather goods, leather products.
Carbon fibers (carbon), e.g. carbon fiber products: caps, plates.
Polyvinyl chloride (PVC), e.g. plastic products.
Polyvinyl butyral (PVB), e.g. laminated glass, film.
Polytetrafluoroethylene (PTFE / Teflon), e.g. plastic products.
Beryllium oxide, e.g. high conductivity oxide ceramics, beryllium alloys, etc.
and materials containing halogens (fluorine, chlorine, bromine, iodine and astatine), epoxy resins or phenolic resins.
If laser engraving or laser cutting processes are performed on the above materials, dust or gases may be generated that may be hazardous to the laser equipment operator or the laser machine function. Therefore, we do not recommend the use of laser equipment for processing these materials.
In addition, do not use the following types of materials.
Very dirty materials
Material that exceeds the restricted material size
The use of poor quality materials may result in poor cutting/engraving results and may cause damage to the equipment, it is recommended that official makeblock materials be used.