Methods of Measuring Distance in Manual Focus

    Article author
    Rustin
    • Updated
    This article is suitable for dealing with large errors and failures in automatic focus.
     
     

    Step 1: Process a Focusing Ruler

    1. Download the processing file here, unzip it, and import it into XCS.
    1280X1280.PNG
    Place a piece of 3mm basswood plywood in the P2 machine and process the file with the output index for 3mm basswood plywood (Black lines are for cutting and red lines are for engraving).
     
    Assemble the processed accessories. The connection joints are shown below:
    1280X1280_1.PNG
    1280X1280__1_.PNG

     

    Step 2: Measure the Distance

    1. Open the equipment setting and move the laser module over the material.
    516be733-9f6c-4842-b685-766469f0233a.png
    65a544bd-dc6c-4385-90a2-6f247308b13c.png
    1. Open the lid and measure focus:
     
    For the slats flat mood, attach the focusing ruler close to the laser head and get the scale on the triangular arrow on the right.
    12015c1e-1db4-49dd-bc62-f5d21a59813f.png
     
    For the open plan mode, attach the focusing ruler close to the laser head and get the scale on the triangular arrow on the left.
    877ac59c-dbd2-42f2-8138-5814f63c5424.png
    1. Move back to the home position: After clicking the home position button, close the setting interface and the lid.
    33e330b6-0001-47c4-ad15-c6f5c8b2a2e3.jfif
     
    Input measure results subject to the processing mood:
    37e0c154-290b-4e56-b44d-d55cb9dc2f2c.png
     

    Was this article helpful?

    0 out of 0 found this helpful

    Have more questions?

    Comments

    0 comments

    Article is closed for comments.