The Air Pressure Drops Unexpectedly
This article applies to:
D1 and D1 Pro
Air Assist
Issue Description
When you are using an Air Assist accessory, if you find that the airflow suddenly becomes very small, please refer to this article for troubleshooting.
You can also refer to this video:
Troubleshoot Air Assist Pressure Drop
Troubleshoot Air Assist Pressure Drop
#1 Check the Air Connector
Check if there is anything blocking the air connector. If so, clean the connector.
#2 Check the Connection Tube
Check if there is anything blocking the connection tube. If so, clean the tube.
#3 Check the Air Tube
Check if the tube is ruptured, and if so, replace the tube.
#4 Check the Air Pump
Check if the pump is damaged, and if so, replace the pump.
If None of the Above Works
If you have followed the instructions above and the issue is still not resolved, please read the article in the link below, collect the troubleshooting steps you have taken, and contact xTool tech support for further advice.
Was this article helpful?
0 out of 0 found this helpful
Have more questions?

Comments
Article is closed for comments.