Switch the Positioning Mode between Red cross & Laser spot

Article author
  • Updated

Now that your D1 Pro is turned on and connected to your computer, click on ⚙ > Working parameters,  you may select Red cross or Laser spot as the positioning mode.

If the Red cross is selected, a red cross will automatically emerge every time the D1 Pro is turned on.


If the Laser spot is selected, you will have to enable it each time by clicking Process > Enable.




Note: the maximum Laser power value for positioning can be set to 10%.

Was this article helpful?

0 out of 0 found this helpful

Have more questions?