M1 Ultra Processing Modes Guide
Updated Sep 19,2024
Updated Sep 19,2024

About this guide

This guide provides a comprehensive overview of M1 Ultra's processing modes, delineating their functionalities, specifications, and suitable applications. Each mode is tailored for specific types of work, whether you are engraving intricate designs on a flat surface, performing high-speed blade cuts, or creating detailed prints with inkjet technology.

 

An overview of each processing mode

# Lasering on flat surface

  • Processing area: 300 x 300 mm
  • Speed: 1 - 400 mm/s
  • File types: Vector, Bitmap
  • Power Range: 1 - 100%
  • Maximum height for auto-measure: 33 mm
  • Maximum material thickness:
    • Without Riser Base: 27 mm
    • With Riser Base: 125 mm

 

# Use rotary attachment

  • Processing area: 300 x 300 mm
  • Speed: 1 - 400 mm/s
  • File types: Vector, Bitmap
  • Power range: 1 - 100%
  • Maximum height for auto-measure: 33 mm
  • Maximum diameter (with Riser Base):
    • Roller: 99 mm
    • Chuck: 108 mm

 

# Blade cut

💡Kind reminder: The following blade types are available only after selecting the material to be processed in blade cut mode within xTool Creative Space (XCS).

- Cutting blade:

  • Processing area: 295 x 295 mm
  • Blade pressure: 45 - 500 g
  • Speed: 1 - 100 mm/s
  • File type: Vector
  • Maximum Processing Thickness: 2.5mm

- Rotary blade:

  • Processing area: 300 x 300 mm
  • Blade pressure: 45 - 2800 g
  • Speed: 1 - 100 mm/s
  • File type: Vector
  • Note: Due to the physical properties of the rotary blade, it is natural to encounter over-cutting.
  • Maximum Processing Thickness: 2.5mm

- Fine-point blade:

  • Processing area: 300 x 300 mm
  • Blade pressure: 35 - 600 g
  • Speed: 1 - 400 mm/s
  • File type: Vector
  • Maximum Cutting Thickness: 1.5mm

 

# Foil transfer tip

  • Processing area: 300 x 300 mm
  • Embossing pressure: 45 - 2800 g
  • Speed: 1 - 100 mm/s
  • File type: Vector
  • Tip types: Fine Tip, Medium Tip, Bold Tip
  • Maximum Processing Height: 3mm

 

# Pen drawing

  • Processing area: 300 x 300 mm
  • Pen pressure: 35 - 600 g (Recommended: 80 g for blue low-tack mat + A4 paper)
  • Speed: 1 - 400 mm/s
  • File type: Vector
  • Maximum Processing Height: 3mm
  • Pen color types: Red, Orange, Yellow, Green, Cyan, Blue, Purple, Black, or user-defined marker pens compatible with the pen holder on the basic carriage of M1 Ultra
  • Notes:
    • Excessive pen pressure may damage pen nibs. Hence, using recommended parameters is advisable. For more, visit xTool Material EasySet Library at https://mt.xtool.com/
    • Pens must be fitted into pen holders to secure them to the basic carriage.
    • After use, clean the pen nib and cap it to prevent clogging.
    • For laser processing, ensure the removal of the drawing pen to avoid damage from the high temperature or open flames as the resultant effect of lasering.

 

# Inkjet printing

  • Processing area: 296 x 286 mm (X-axis: 4 - 300 mm, Y-axis: 13 - 299 mm)
  • Ink concentration: 0 - 100%
  • File type: Bitmap
  • Notes:
    • Place the bottom cover of the ink cartridge container in the designated area before processing. The machine will automatically reattach it after processing, unless it is undergoing ink module calibration.
    • Ink cartridges are susceptible to clogging when exposed to air. To extend their lifespan, please consult the maintenance video tutorial below.

# Multi-module processing

  • Processing area: If inkjet printing is included, follow the inkjet printing processing area.
  • File types: Various combinations
  • Individual settings: Set parameters individually for each processing mode.

💡 Use tips:
1. When "Inkjet printing" mode is selected, do not place materials in the grey areas beyond the XCS canvas.
2. Different modes may require changing modules, such as switching from "Fine-point blade" to "Pen drawing" or from "Process on baseplate" to "Blade cut". You will receive software prompts for these adjustments.

 

# Screen preparation

  • Processing area: 255.8 x 209.6 mm (X-axis: 32~286.8mm, Y-axis: 41.4~250mm)
  • Processing types: Line Engraving, Fill Engraving
  • Power range: 1 - 100%
  • Speed: 1 - 300 mm/s
  • Notes:
    • M1 Ultra is only compatible with small-sized screens, specifically 9 inches x 12 inches (228.6mm*304.8mm).
    • Install the frame fixing piece on the right.
    • Mirror the screen printing patterns left to right before processing.

 

Comparison of processing modes

Processing Mode

File Type

Processing Type

Area (mm)

Max Speed (mm/s)

Max Height for Auto-measure (mm)

Is Baseplate Required

Maximum Cutting Thickness 

Without Riser Base (mm)

With Riser Base (mm)

Process on Baseplate

Vector, Bitmap

Engrave

Vector Engrave

300*300

300

33

Yes

25

125

Bitmap Engrave

400

Yes

Laser Cutting

300

Yes

User Rotary Attachment

Roller

Chuck

No

Roller

Chuck

Engrave

Vector Engrave

25

120

/

99

108

Bitmap Engrave

400

 

Processing Mode

File Type

Processing Area mm

Blade / Pen Pressure (g)

Max Speed (mm/s)

Types

Is Baseplate Required

Maximum Cutting Thickness 

Without Riser Base (mm)

With Riser Base (mm)

Cutting Blade

Vector

295*295

45~500g

100

/

Yes

2.5

/

Rotary Blade

300*300

45~2800g

100

/

2.5

/

Foil Transfer Tip

45~2800g

100

Fine Tip, Medium Tip, Bold Tip

3

/

Fine-point Blade

35~600g

400

/

1.5

/

Fine-point Pen

35~600g

400

Red, Orange, Yellow, Green, Cyan, Blue, Purple, Black

3

/

 

Processing Mode

File Type

Processing Type mm

Power / Concentration

Max Speed (mm/s)

Is Baseplate Required

Maximum Cutting Thickness 

Without Riser Base (mm)

With Riser Base (mm)

Inkjet Printing

Bitmap

296*286

Concentration 0~100%

/

Yes

20

/

Screen Preparation

Vector, Bitmap

255.8*209.6

Power 0~100%

300

/

 

Help us improve

If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.

 

Still need help?

If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.

Was this page helpful?
4 out of 4 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.