How to Place the Honeycomb Panel on the Riser Base for M1 at the Correct Height
Updated Dec 29,2023
Updated Dec 29,2023

Introduction

Given the fixed focusing range of M1, once exceeding this range, "automatic measure" and "laser focus" will be disabled, potentially leading to processing problems.

Hence, it is paramount, during processing, to position the material surface within the range.

With the surface of the bottom plate at the time of factory shipment as the reference surface 0 mm, the relationship between the focusing range and the XCS automatic measurement range is as follows:

Processing Mode
Focusing Range (mm)
 
XCS Automatic Measurement Range (mm)
Laser Flat
0~16
0~16
Laser Cylindrical
-19~16
0~34
 
Open Plane
-19~16
0~34
Blade Cut
No Focusing Required
No Measurement Required

 

How to Do It

#1 When using the riser base with the honeycomb panel, select either the Open Plane or the Laser Cylindrical for processing.

 

#2 Refer to the table below for placing the honeycomb panel at the correct height based on the dimensions of the processing material.

Honeycomb Panel Position
Suitable Material Thickness
 (Open Plane)
Suitable Material Circumference
 (Laser Cylindrical - Roller)
Suitable Material Circumference
 (Laser Cylindrical - Chuck)
TOP
0~13mm
Unable to process
Unable to process
α
30~65mm
0 ~ 88mm
Unable to process
β
60~90mm
88~ 220mm
0 ~142mm
γ
90~120mm
220~299mm
142~314mm

#3 If the material size for processing is not included in the table, adjust the material height to ensure the processing surface is within the focusing range while making sure M1 is placed steadily during processing.

 

Note

As the provided data represents theoretical values, slight variations may occur from actual parameters due to factors including unavoidable assembly tolerances, measurement errors, and flatness discrepancies.

 

Help Us Improve

If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.

 

Still Need Help?

If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.

Was this page helpful?
35 out of 40 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.