Machine CourseBeginnerP2/P2S
Getting Started with P2S/P2
Unbox, set up, and run your first project on the P2S.
3 Units
45 min
Beginner
Subscribe
Overview
Get your xTool P2S ready to work. You'll unbox and calibrate the machine, complete the laser safety training every operator should know, and connect the P2S to xTool Studio to run your first job.
What You'll Learn
Identify the main parts, indicators, and specs of the P2S
Unbox, install, and calibrate the P2S
Understand the laser safety rules for operating the P2S
Know the responsibilities of a Laser Safety Officer
Connect the P2S to xTool Studio over USB or Wi-Fi
Set up xTool Studio and run your first project
Curriculum
ArticlexTool P2S User Guide
15 min Lesson 1 · Article
xTool Official
xTool P2S User Guide
xTool OfficialArticleLSO Training for xTool P2/P2S
20 min Lesson 2 · ArticlexTool Official
LSO Training for xTool P2/P2S
xTool OfficialArticleConnect and Set Up xTool P2/P2S with xTool Studio
10 min Lesson 3 · ArticlexTool Official
Connect and Set Up xTool P2/P2S with xTool Studio
xTool Official
